|
Below is a table of Ellis products. Click on the pictures or links below to find out more information.
Click here for Products list with weights and prices |
Click here for Products descriptions and thumbnail images. |
|
|
Prices are subject to chage without warning at anytime because of steel price volatility.
Products used with Aluminum Purlins
Click here to view product list.
Specialized Products:
Click here to find out more about using Ellis Shores for Mining.
Click here to find out more about our products used with Shoring Frames.
| |
 [Product Details]
|
Ellis Bridge Jack - [Product Details] For a rugged and durable piece of hardware in the Ellis line, none get it done like the Ellis Bridge Jack. With top and bottom plates measuring 1/2" x 9" x 9" for support, the Acme Screw is 2 and a 1/2" in diameter and greased for easy turning.
|
|
|
 [Product Details] |
Ellis Column Form Clamps Single Bar - [Product Details] The Ellis Column Form Clamp is a simple way to clamp column forms. There are no moving parts and every bar is interchangeable. Only a hammer is needed to assemble the Column Form Clamps.
|
|
|
 [Product Details] |
Ellis Column Form Clamps Scissor - [Product Details] Here’s the fast, easy and accurate way to form columns with the ELLIS Column Clamps. All parts are connected to make single units with no loose parts to get lost. The units are identical, no right or left, up or down. Only a hammer is needed to put up the form.
|
|
|
 [Product Details]
|
Ellis Guardrail Stanchion - [Product Details] The Guard Rail Stanchion Clamps onto the slab every 6 feet and uses 2x4’s, 2x6’s or cable for rails. Ellis Manufacturing’s Guard Rail Stanchions are Fast, Safe, Strong and an Affordable way to build your guard rails.
|
|
|
 [Product Details]
|
Other Ellis Guardrail Products - [Product Details] Ellis Manufacturing's other Guardrail products inclued the Perimeter Protection Post, Slip On Guard Rail Bracket, & Twistlock Guard Rail Bracket.
|
|
|
|
 [Product Details] |
Ellis Jack Wrenches - [Product Details] The Ellis Jack makes leveling of shores and purlins simple. The Jack grips the wood of the lower shore member and the upper shore member is raised about one inch per stroke through the lifting pressure of the cam at the anchored end of the Jack handle.
|
|
|
 [Product Details] |
Ellis Purlin Splicer & Red Head - [Product Details] Here is the new simplified way to do two jobs at once in shoring: Nailed to adjoining ends of two purlins, it is a splicer…with a shore slipped into the bottom part, it is a hore holder!
|
|
|
 [Product Details] |
Ellis Reshoring Spring - [Product Details] Hold it in place for as long as you want to. Keeping your shore tight against any slab is made easy during reshoring with Ellis Reshore Springs. No time or lumber is wasted in cutting and nailing to the top and bottom of each shore.
|
|
|
 [Product Details]
|
Ellis Screw Jacks - [Product Details] When shoring a multi-story building, and your shores have to be the same height, the Ellis Screw Jack is the way to keep you on the level. Contractors young and old enjoy using the EIlis Screw Jack for shoring at near uniform story heights.
|
|
|
 [Product Details] |
Ellis Shore Clamps - [Product Details] You can erect five or more Ellis Shores while you are measuring, cutting, splicing, erecting and wedging one 4 x 4 shore the old fashioned way. Yes, Ellis Shores are that simple to use.
|
|
|
 [Product Details]
|
Ellis Slip-in Shore Holders - [Product Details] Eliminating the need for old-fashioned shore-making, which entailed measuring,cutting, nailing, wedging, etc.
|
|
|
 [Product Details]
|
Ellis T Head - [Product Details] Think of the money you can save by switching to Ellis T-Heads and using Ellis Methods on purlin assemblies, beam forms, etc.!
|
 [Product Details]
|
Ellis Wall Brace - [Product Details] Ellis Wall Braces can be attached uickly to the top end of a 2x4 brace. Note also the rolled angle, which makes the metal fit well against the lumber and gives increased strength to the brace.
|
|
 |